bushings, ensure that each hole in the bushing aligns with the grease fitting opening on the steering knuckle. Use special tools grip CH and bushing repair tool CH (A) for removal of the kingpin bushings.
Use special tools grip CH and bushing repair tool CH (A) and (B) for installation of the kingpin bushings. Refer to. King Pin, Spring Pin & Bushing Tools. Precision tooling that makes installation reliable, quick, and easy.
Our King Pin, Spring Pin & Bushing Tools are proudly made in the USA and are simpler to install than other products on the market. Feb 27, Rarely are two kingpin jobs the treecleanup.buzz fall out,others have to be beaten out with treecleanup.buzz your wheel,brakes,backing plates,tie rod,treecleanup.buzz tapered locking pin in axle eye,and top and bottom caps on treecleanup.buzz king pin out,hopefully comes out treecleanup.buzz sure your play was not in the axle itself,whole different job,treecleanup.buzz severe cases,have had to.
Includes the basic tools needed for installation of reamable. 2. ZTSEA KING PIN BUSHING INSTALLER KIT. KING PIN BUSHING INSTALLER KIT. To be used with appropriate Bushing Remover/Installers and R. Associated Products. INSTALLER,BUSHING. ZTSEA.Refer to the Kingpin Bushing Removal and Installation sections in this publication. CHECKING THE LOWER KINGPIN BUSHING 7.
Install a dial indicator so that the base is on the axle and the indicator tip is against the inside of the bottom of the knuckle. 8. Set the dial indicator to “0” zero. GREASING AND LUBRICATION SPECIFICATIONS. May 03, USA, MA, Gloucester; Posts:; Honing king pin bushings If you fit the bushing over a new king pin it will slide on freely but once you install the bushing the king pin won't fit at all.
The bushing material will squeeze a bit which is why you need to hone the bushings. The hone needs to be long enough to do both bushings at the same time. Mar 12, Unscrew mounting nut (2) from tube-shock and pull it clear of stud. 6. Remove nuts (1) from kingpin lower plate and rotate the diagonal strut (3) out of the way. 7. Remove the ball joint (2) from the spindle. 8. Remove one screw from the damper blade mounting plates and turn the lower plate outboard to free the blade.
Features: Hydraulic Hollow Center Cylinder with 30 tons of force makes kingpin and brake anchor pin removal easy. Five special collars and two pins allow this product to work on both straight and tapered kingpins. Product design accommodates pins from 7/8" to 2" and up to /4" in length for many models of trucks and buses.
Product Dimensions. OEMTOOLS Pilot Bearing Puller Attachment, Pilot Bearing and Bushing Removal, Fits 5/8” x 18” or 3/4” x 16” Threaded Rods, Black out of 5 stars